How to Apply Anti Icky Poo to Carpet

If you are able to lift the carpet, spray both sides of the carpet as well as the padding and floor. In fact, spray the entire area of the carpet which appears to be contaminated.

As well as walls, curtains, hearth, etc. If you’re not able to lift the carpet, a large syringe may be used.

Injecting is the recommended method for treating carpeting.

For those who are not injecting, make sure to get the liquid into the padding because that is where 90% of the urine is. To do this, spray infect carpet surface, walk on the area thoroughly, wait 2 days and spray the carpet surface again thoroughly.

Have ready a spray bottle of our enzymatic digester, a larger container of the same, and a shallow bowl in which to pour. Drawing the liquid from the bowl is the easiest method of filling the injector.

Pierce the carpet backing with the needle and lift the tufts slightly with your other hand. Slide the needle in horizontally between the secondary backing and the top of the pad. Push one ounce, or 30 cc's, into the void.

Repeat the procedure each four to six Inches, grid fashion, throughout the contaminated areas until satisfied that you have adequately covered it all. You can expect that one ounce will cover four to six Inches in diameter depending on density of the fabric and thickness of the pad.

Generally, you will have to refill your injector many times. Using your spray bottle, cover the face yarns well and walk around on the entire treatment with your full weight In order to spread and squeeze in the good stuff. When white foam from the digester appears up through the carpet backing beneath, you know it has soaked all of the way through.

AIP your best source for removing smells and stains from carpet.